* Temperature & humidity sensors * Volumetric airflow & fluid sensors * Mold sensors * Occupancy detecting sensors * CO2 demand-controlled ventilation (DCV) sensors – work with sensors that detect a building’s occupancy and adjust ventilation accordingly * Light Sensors tied to motorized window treatments can pick up on sunlight and adjust window shading during the course of a day
Animals are fitted with sensor-equipped collars that collect information regarding their location, direction, and average speed (geolocation, acceleration, gyro sensors)
Bluetooth low-energy (BLE) beacons Typical uses: Warehouses: Automatic inventory of assets Indoor positioning: Tracking assets’ location automatically
Cameras for mines and tunnels are an essential element of security and safety monitoring. The mining sector presents a number of challenges, from low lighting to connectivity issues in remote areas. These surveillance cameras observe the many processes within the mine and are mostly installed in a permanent, overt manner, with portable covert cameras being used on a temporary basis. IR thermal imaging cameras are often used as they offer the ability to see in dark, foggy or dust filled environments where there are large trucks, cranes, robotics and other moving apparatus that present danger to humans.
Fiber-optic Distributed Temperature Sensing (DTS) systems and pressure gauges enable critical monitoring during exploration and energy production for Enhanced Geothermal Systems (EGS). These sensors can be used to: – Estimate production potential in or between new wells by measuring the distributed temperature and the point pressure, or pressure measured at the bottom of the well. These measurements allow the calculation of reservoir size, flow resistance between wells (if multiple wells are instrumented), well bore damage caused by drilling, effectiveness of the fracturing operations, and well completion. – Monitor surface and subsurface scale buildup and chemical clean-up. Scale, a mineral residue precipitated from geothermal fluid in response to changes in water pressure and temperature, builds up on pipe walls and will, over time, form a thick, insulating layer that limits flow and may block a pipe. Chemicals are injected into the pipe to remove the accumulated scale. By understanding severity of the scaling, operators can better consider what mitigation options are most suitable as well as minimize the use of expensive chemicals. – Provide permanent monitoring of injector and producer wells to allow identification of the specific zones and fractures that produce fluids. – Perform integrity monitoring for casing and tubing leaks to avoid contaminating ground water and subsurface aquifers.
For habitat environment observation, monitoring sensors such as temperature, humidity, height, wind, light, and cameras are used
Light sensors – allows for the greenhouse lighting to be adjusted depending on the sun’s intensity, benefits of increasing electrical efficiency and cost savings of the entire system. Sensors for Volumetric water content (VWC), Bulk electrical conductivity (ECb), Temperature – Used to monitor soil moisture content
Machine vision camera and spectral imaging – helps growers track the growing process of their entire operation, give details on plant height, 3D leaf area, projected leaf area, digital biomass, leaf inclination, leaf area index, light penetration depth, and leaf coverage
Mobile Monitoring and tracking devices equipped with GNSS and other sensors (temperature, humidity, motion, shock, vibration, pressure, light/darkness) to monitor condition of the asset
Mobile-enabled IoT sensors, Bluetooth beacons, infrared counters or sensors embedded in the pavement, turnstiles
Parking sensors (Infrared, Passive Infrared(PIR)) and Ultrasonic Vehicle Detection Sensors – Individual parking space sensors that gather and transmits information for management, payment and compliance monitoring
Pest control sensors on traps that provide accurate information on trap status, whether armed, unarmed, or armed without a catch.
Portable waste bin or portable toilets enabled with GNSS. Once data related to fill rates and temperatures of smart bins /toilets are collected, the sensors relay the exact location and other waste related information of the bins in question so waste management can send out SMSes to nearby garbage collectors to do the needed collection/emptying before harmful carbon emissions are released.
RFID Readers: E.g., Handheld Typical uses: Warehouses: Tracking assets that are packaged or inside a container Hospitals: Tracking asset locations automatically within a limited distance range
Sanitation devices connected with sensors provide ability to control water flow, paper consumption, air flow for hand drying, and aroma or cleaning chemical sprays on a timer that can be controlled by a single source
Sensors that monitor a building’s air quality (i.e. carbon monoxide and other volatile carbon emission detection)
Smart meters that collect granular real-time data across the water grid, LED light sensors to monitor water levels in tanks, pH sensors, temperature sensors and turbidity sensors in pipelines and storage and distribution tanks, volume sensor
Smart Waste Bin with wireless ultrasonic fill-level sensors and other indicators such as temperature and tilt within waste container
soil moisture sensors – used to assess the water level in the soil temperature and humidity sensors – used to monitor the environment, which had a direct influence on the water level of the soil
Tag sensors and readers for tracking people, collecting environmental data, equipment tracking, and real-time alerts. RFID transmitter devices are mounted on headlamps belts or badge cards of miners to enable tracking of workers in real-time.
The rodent sensors are placed in the high rodent-activity areas for inspection. When rodents pass through the location, infrared sensors trigger notification to all the relevant parties such as owner and pest management service about the rodent activity so that they can decide a plan of action of elimination.
Underground mining has significant safety hazards due to high-stress concentrations, weak rock masses, and limited access and air quality. Different sensors are used in mine-related activities, such as geophones in exploration and blast control, piezometers in dewatering and toxic gas detectors in working frontlines.
Vibration sensors such as low-frequency accelerometers are mounted on the casing of the turbine and generator near the bearings and shaft. Water quality sensors (Dissolved Oxygen (DO) Sensor)
Wireless Z-Traps are devices used to catch pests around the plants using pheromone lure. Pest count information is wirelessly passed along from up to 1 km away using a base station to the online cloud service. This information is used to study and determine where and how much pesticides will be required. Imagery sensors capture imagery data to identify the diseases in plants – RGB sensors – have three colour channels, i.e., red, green and blue, which can be used to perceive the biometric effect in the plants – fluorescence Imagery sensors – used to distinguish the photosynthetic activities in the plants – spectral sensors – capture images containing the spatial information of objects in multiple wavebands, used to analyse crops’ health and pest attack – thermal sensors – used to measure the water status in the plant by measuring the temperature Weather condition monitoring sensors, i.e., temperature, dew, humidity and wind speed, are used to monitor weather parameters to find a correlation between pest growth with weather
