– Global positioning system tag – communicates with GPS satellites to establish position with high accuracy, but only when the tag or animal is on land or at the water surface – Fastloc Global positioning system tag – GPS tag for aquatic animals that surface or haul out, when the tag locks onto the GPS satellite network to establish position with high accuracy – Pop-up satellite archival tag – after some period of time recording sensor data, the tag detaches itself from the animal and floats to the surface where it uses satellite connectivity to uplink the data stored on the tag – Acoustic tag – attached to the animals being tracked emit acoustic signals (typically ultrasound) which travel through water much better than RF signals. These signals are then received by buoys, which can then use satellite communications to backhaul the data to where it’s needed.
* Temperature & humidity sensors * Volumetric airflow & fluid sensors * Mold sensors * Occupancy detecting sensors * CO2 demand-controlled ventilation (DCV) sensors – work with sensors that detect a building’s occupancy and adjust ventilation accordingly * Light Sensors tied to motorized window treatments can pick up on sunlight and adjust window shading during the course of a day
Bluetooth low-energy (BLE) beacons Typical uses: Warehouses: Automatic inventory of assets Indoor positioning: Tracking assets’ location automatically
Cameras for mines and tunnels are an essential element of security and safety monitoring. The mining sector presents a number of challenges, from low lighting to connectivity issues in remote areas. These surveillance cameras observe the many processes within the mine and are mostly installed in a permanent, overt manner, with portable covert cameras being used on a temporary basis. IR thermal imaging cameras are often used as they offer the ability to see in dark, foggy or dust filled environments where there are large trucks, cranes, robotics and other moving apparatus that present danger to humans.
Fiber-optic Distributed Temperature Sensing (DTS) systems and pressure gauges enable critical monitoring during exploration and energy production for Enhanced Geothermal Systems (EGS). These sensors can be used to: – Estimate production potential in or between new wells by measuring the distributed temperature and the point pressure, or pressure measured at the bottom of the well. These measurements allow the calculation of reservoir size, flow resistance between wells (if multiple wells are instrumented), well bore damage caused by drilling, effectiveness of the fracturing operations, and well completion. – Monitor surface and subsurface scale buildup and chemical clean-up. Scale, a mineral residue precipitated from geothermal fluid in response to changes in water pressure and temperature, builds up on pipe walls and will, over time, form a thick, insulating layer that limits flow and may block a pipe. Chemicals are injected into the pipe to remove the accumulated scale. By understanding severity of the scaling, operators can better consider what mitigation options are most suitable as well as minimize the use of expensive chemicals. – Provide permanent monitoring of injector and producer wells to allow identification of the specific zones and fractures that produce fluids. – Perform integrity monitoring for casing and tubing leaks to avoid contaminating ground water and subsurface aquifers.
Mobile Monitoring and tracking devices equipped with GNSS and other sensors (temperature, humidity, motion, shock, vibration, pressure, light/darkness) to monitor condition of the asset
Parking sensors (Infrared, Passive Infrared(PIR)) and Ultrasonic Vehicle Detection Sensors – Individual parking space sensors that gather and transmits information for management, payment and compliance monitoring
Portable waste bin or portable toilets enabled with GNSS. Once data related to fill rates and temperatures of smart bins /toilets are collected, the sensors relay the exact location and other waste related information of the bins in question so waste management can send out SMSes to nearby garbage collectors to do the needed collection/emptying before harmful carbon emissions are released.
RFID Readers: E.g., Handheld Typical uses: Warehouses: Tracking assets that are packaged or inside a container Hospitals: Tracking asset locations automatically within a limited distance range
Robotic assisted surgical device. On the remote expert/surgeon side, these applications may require a VR interface in order to provide an immersive sense of experience.
Satellites: Geostationary and polar-orbiting weather satellites are equipped with advanced sensors to monitor wind patterns at high altitudes globally. They are particularly useful for tracking large-scale weather systems and providing data for flight path planning over remote areas like oceans. Satellite sensors that track high-altitude wind speeds can range from those capturing basic wind vector data to more complex imaging systems.
Seismic sensors used for monitoring of seismic activity in geothermal plants can enhance the safety aspect of power generation. Geothermal power plants are generally located near earthquake-prone zones and the ability to manage such power plants remotely is useful for employee safety. Vibration and temperature sensors are used in turbines and generators to monitor temperatures and detect vibrations.
Smart meters that collect granular real-time data across the water grid, LED light sensors to monitor water levels in tanks, pH sensors, temperature sensors and turbidity sensors in pipelines and storage and distribution tanks, volume sensor
Smart Waste Bin with wireless ultrasonic fill-level sensors and other indicators such as temperature and tilt within waste container
Underground mining has significant safety hazards due to high-stress concentrations, weak rock masses, and limited access and air quality. Different sensors are used in mine-related activities, such as geophones in exploration and blast control, piezometers in dewatering and toxic gas detectors in working frontlines.
Vibration sensors such as low-frequency accelerometers are mounted on the casing of the turbine and generator near the bearings and shaft. Water quality sensors (Dissolved Oxygen (DO) Sensor)
